This is the Hyperion EOS 0610i Net 6S, 10A, 250W max balancing charger. The EOS 0610i Net is an extremely powerful, versatile, easy-to-use charger with special features for speed charging lithium packs up to 6S. Super high charge rates are possible even with the largest 6S packs, with up to 10A @ 22.2V (6S)! Integrated LBA10+ balancer has 300mA balance power per cell. Terminal Capacity Selection, PS Load Control, PC Dataport, and User-Upgradeable firmware round out this fantastic package. Output Charge Cord/Connector set and Hyperion Balance Multi-Adapter for 2S to 6S packs are included.

But don't stop there! You may "Network" connect two EOS610i's together, using option cable HP-EOS6-MSC. In this case, you can charge two separate but similar Lipo, Lion, or A123 packs as a single unit, to make flight packs from 7S to 12S at 500W charge power! Nothing else on the planet offers so much power for so few dollars out of your pocket.

For balancing lithium batteries with balance adapters not compatible with the included Hyperion balancer adapter, please see our selection of balancer adapters to fit Thunder Power, Flight Power, ProTek R/C, E-Flite, Align and other brands of batteries.

Charge Amps vs. Charge Watts

This charger is rated at 6S, 10A with a 250W power limit. Unlike other chargers, this charger CAN charge a 6S battery at the maximum charge rate of 10A! Or when linked in Network mode, can charge a 12S battery at up to 10A!

Features

• 2-Line, 16-Character Blue Backlit LCD Data Display
• 10 User-definable Memory Positions
• 0.1A - 10.0A Selectable Charge Current (250W max)
  
• Up to 10A @ 6S max charge rate (250W max)
  
• Lipo 2C, A123 4C+ Speed Charger
• Lipo 1S-6S, A123 1S-6S
• NiCd/NiMH 1-16cell, Lead-Acid 2-24V
  
• TCS - Lipo Terminal Capacity Selection 50% ~ 100%
• Built-in Hyperion LBA10/300 Balancers with 10A max rating
  
• 300mA max balance rate per cell
• Rich Data Displays during and after charging and discharging
• PC Port for data logging and firmware updates
• Temperature Sensor Port
• 11V-28V DC Input! Up to 28V input for higher efficiency when charging high voltage packs, and compatibility with a wider selection of AC/DC Power Supplies
• Power Supply Amperage Control to allow reliable charging with lower output power supplies
• Input Cable with 4mm male connectors
• Integral, Thermostat-Controlled Cooling Fan
• Rugged Aluminum Case with Insulating End Caps
• Firmware Upgradable!

Click on the link below for mor info.

http://media.hyperion.hk/dn/eos/EOS0610iNET-MAN-EN.pdf